Cromar Cromapol Acrylic Waterproof Roof Coating Black 1kg / 5kg / 20kg

Product Code: SOLCROMARPOL/B

Have a Question?

Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.

Delivery Cost

Proceed to the Basket Page and use our Delivery Calculator for your order.

FREE Click & Collect

Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).

Related Products

Cromar Cromapol Acrylic Waterproof Roof Coating Grey 1kg / 2.5kg / 5kg / 20kg - from About Roofing Supplies Limited

In stock

£10.95 (£13.14 Inc VAT)
Cromar Exterior Water Seal 5 litre / 25 litre - from About Roofing Supplies Limited

Lead time confirmed upon order

£13.95 (£16.74 Inc VAT)
Cromar Cromapol Acrylic Waterproof Roof Coating White 5kg / 20kg - from About Roofing Supplies Limited

In stock

£22.95 (£27.54 Inc VAT)
Cromar Cromaprufe Rubberised Bitumen Emulsion 5 litre - from About Roofing Supplies Limited

Lead time confirmed upon order

£14.95 (£17.94 Inc VAT) £13.95 (£16.74 Inc VAT)

Details

Cromar Cromapol Acrylic Waterproof Roof Coating Black 1kg / 5kg / 20kg

Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent, and is designed to prevent the incress of water.

Due to the high level of fibres in Cromapol, this coating will bridge small gaps and fissures and requires only one coat to provide instant waterproofing.

Cromapol is suitable for general waterproofing and sealing of roofs, pitched surfaces & for sealing flashings

Amazingly, Cromapol will waterproof instantly, even in damp or wet conditions, will not wash off while curing and will withstand ponding and usually covers in only one coat which normally needs no primer.

Ideal for emergency repairs or long term applications equally!

Please note: Whilst Cromapol can be walked on, it is not suitable for anything more than occasional, light foot traffic.

Suitable for:

  • Flat roofs
  • Pitched roofs
  • Corrugated Asbestos roofs
  • Roof lights
  • Fibre cement sheeting
  • Roof and window Flashings
  • Roofing Felt (must be primed using CP Primer - available separately)
  • Gutters
  • Slate
  • Asphalt
  • Lead
  • Metal

Technical:

  • Flashpoint: 40 degrees c
  • VOC Details: EU Limit for this product CAT. 2(i) : 500g/l (2010).
  • This product contains max. 459 g/l VOC's

Storage:

  • Shelf Life: 12 months under good storage conditions in original unopened containers
  • Storage Conditions: Store away from children, indoors between 5 degrees c and 20 degrees c, away from flames & sources of ignition

Coverage:

  • 1 - 2 kg per m/2
  • One coat only required
  • 1 kg tin covers between 0.5 - 1 m/2
  • 2.5 kg tin covers between 1.25 - 2.5 m/2
  • 5kg tin covers between 2.5 - 5 m/2
  • 20kg tin covers between 10 - 20 m/2

Drying Time:

  • Up to 1 week depending on the ambient temparature, and the thickness of the coating as applied.
  • This product may remain soft for a further period, but this is not detrimental to its waterproofing abilities

Features

  • Excellent adhesion providing instant protection
  • Can be applied in damp weather
  • No wash off
  • Application in one coat
  • Seamless
  • Fully flexible
  • Economical

Fixing

Application:

  • Clean all debris to ensure a dust free surface. All moss and lichen must be removed using Cromar’s Moss & Mould remover, ensuring all corners and gutters are clean and free from plant growth.
  • Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application.
  • Gap or expansion joints greater than 3mm must be covered using Glass-Fibre scrim and Cromapol. This must be carried out prior to full coating.
  • Cromapol requires no primer on most surfaces with the exception of asphalt or bitumen for which a coat of Cromar CP Primer is recommended.
  • Cromapol will tolerate damp surfaces although as with any application for best results Cromar recommend applying to a dry surface.
  • Cromapol is easily applied using a brush, roller or squeegee.
  • These application instructions are for guidance only and do not constitute any warranty of product performance.
  • Comprehensive application instructions relating to specific surfaces and uses may be obtained on application to Cromar Building Products.
  • Whilst every endeavour has been made to ensure that this information is reliable, we cannot accept any liability for loss, injury or damage which may result from its use.
  • Application temperature should be between 5 degrees c - 25 degrees c.
  • Cromar strongly recommends inspecting the surface and carrying out adhesion tests to any existing coating or substrate prior to the application.
  • Not for use in areas where solvent or oil contact is likely, or on walkways, balconies, timber and new concrete.
  • It is the users responsibilty to determine suitability for use. If in doubt please contact Cromar’s technical department on: 0844 8588186
  • N.B. Slight oily separation may occur in unopened containers over 8 months old. This is normal, is easily stirred back into the product, and in no way affects its performance.

Technical specification

Contents

  • 1 kg tin covers between 0.5 - 1 m/2
  • 2.5 kg tin covers between 1.25 - 2.5 m/2
  • 5kg tin covers between 2.5 - 5 m/2
  • 20kg tin covers between 10 - 20 m/2

Coverage

  • 1 - 2 kg per m/2
  • One coat only required

Drying Times

  • Drying Time: Up to 1 week dependent on the ambient temperature and the tickness of the coating as applied
  • This product may remain soft for a further period, but this is not detrimental to its waterproofing abilities

Storage

  • Shelf Life: 12 months under good storage conditions in original unopened containers
  • Storage Conditions: Store away from children, preferably under cover and between 5 degrees c and 20 degrees c

Technical

  • Flashpoint: 40 degrees c
  • VOC Details: EU Limit for this product CAT. 2(i) : 500g/l (2010). This product contains max. 459 g/l VOC's

Related Articles