25mm Over Fascia Roof Eaves Vents 10 metre pack

25mm Over Fascia Roof Eaves Vents 10 metre pack

Product Code VNTFV25/10M

Description

25mm Over Fascia Roof Eaves Vents 10 metre pack

25mm fascia vents are suitable for conventional cold roofs, warm roofs, flat roofs and pitched roofs below 15 degrees.

Easily installed, these unobtrusive units provide eaves ventilation over the fascia in new build or re-roofing applications.

SlideLock Technology enables rapid installation with secure continual ventilation. Pieces are 500mm with interlocking male and female ends to allow for a continuous length.

Allows an air stream in to the roof void between the felt and fascia board.

Dimensions:

10 mtr (500mm x 20) x 38mm wide x 38mm deep (approx)

Features:

25mm vents suitable for conventional cold roofs, warm roofs, flat roofs and pitched roofs below 15 degrees
Unobtrusive method of ventilation
Can be installed with or without soffit
Savings in depth of fascia can be made
Prevents entry of birds and large insects
Complies fully with relevant Building Regulations and British Standards

Material:

Polypropylene

Colour:

Black

Technical

Dimensions

Dimensions: 10 mtr (500mm x 20) x 38mm wide x 38mm deep (approx)

Technical

Material: Polypropylene
Colour: Black

Features

25mm vents suitable for conventional cold roofs, warm roofs, flat roofs and pitched roofs below 15 degrees
Unobtrusive method of ventilation
Can be installed with or without soffit
Savings in depth of fascia can be made
Prevents entry of birds and large insects
Complies fully with relevant Building Regulations and British Standards

Fixing

Installation:

The first vent is nailed to the top of the fascia at the right hand edge of the eave and then subsequent units fixed continuously along the fascia.
Breathable felt is then brought over eaves trays / felt and fascia vents, and run into the gutter as normal