10mm Over Fascia Roof Eaves Vents 10 metre pack
(£10.20 Incl. VAT)
- Buy 2 for £8.20
(£9.84 ) each and save 4% - Buy 5 for £8.00
(£9.60 ) each and save 6% - Buy 10 for £7.50
(£9.00 ) each and save 12%
Description
10mm Over Fascia Roof Eaves Vents 10 metre pack
Fascia Vents provide unobtrusive continuous eaves ventilation.
Easily installed, these unobtrusive units provide eaves ventilation over the fascia in new build or re-roofing applications.
SlideLock Technology enables rapid installation with secure continual ventilation.
Pieces are 500mm with interlocking male and female ends to allow for a continuous length. Allows an air stream in to the roof void between the felt and fascia board.
Suitable for cold roofs, these fascia vents provide an unobtrusive method of ventilation.
Features:
- Prevent entry of birds and large insects.
- 10mm vents suitable for conventional cold roofs
- Unobtrusive method of ventilation
- Can be installed with or without soffit
- Savings in depth of fascia can be made
- Prevents entry of birds and large insects
- Complies fully with relevant Building Regulations and British Standards
Dimensions:
- 1 mtr (500mm x 2) x 42mm wide x 25mm deep (approx) x 20 lengths
Material:
- Polypropylene
Colour:
- Black
Technical
Dimensions
- Dimensions: 10 mtr (500mm x 20) x 42mm wide x 25mm deep (approx)
Technical
- Material: Polypropylene
- Colour: Black
Features
- 10mm vents suitable for conventional cold roofs
- Unobtrusive method of ventilation
- Can be installed with or without soffit
- Savings in depth of fascia can be made
- Prevents entry of birds and large insects
- Complies fully with relevant Building Regulations and British Standards
Fixing
Installation:
- The first vent is nailed to the top of the fascia at the right hand edge of the eave and then subsequent units fixed continuously along the fascia.
- Breathable felt is then brought over eaves trays / felt and fascia vents, and run into the gutter as normal