Cromar Lead Free Plus Lead Replacement Flashing

ANCLF
As low as

£19.75
( £23.70 Incl. VAT)
Availability: In stock
- +

Velux March 2018 Promotion | About Roofing Supplies

Description

Cromar Lead Free Plus Lead Replacement Flashing

Cromar Lead Free Plus lead replacement flashing is a high performance low cost aluminium flashing suitable for use as an alternative to traditional lead in both flat and pitched roof applications.

Produced from sheet aluminium with a protective polyurethane coating on top and a polyisobutylene adhesive on the underside.

Finished with a dimpled profile this unique construction ensures that Lead Free is waterproof, durable and extremely malleable.

The polyisobutylene adhesive ensures a strong permanent bond to all building materials without the need for a primer unless a surface is extremely unstable and forming a watertight joint requires no additional tape or sealant.

Extremely safe to use due to its lightweight construction and cutting and shaping is achieved with a knife or scissors that produce no sharp edges. Consequently installation is rapid and safe with no health and safety issues.

This product has a 15 year guarantee with a life expectancy in excess of 20 years.

Technical

Technical

  • Colour: Grey
  • Form: Sheet aluminium with a protective polyurethane coating on top and a polyisobutylene adhesive on the underside

Features

  • 15 year manufacturers guarantee
  • Low Cost
  • Versatile
  • Waterproof
  • Durable
  • Malleable
  • Lightweight
  • Easily Cut
  • Easily Repaired
  • No health and safety issues
  • No resale value
  • Alternative to traditional lead
  • Bonds to all building materials without the need for a primer

Fixing

Application:

  • Lead Free Plus can be installed and worked in any direction using a mallet, roller or by hand
  • Cutting is achieved with scissors or knife
  • Before fixing to any building material surface the protective paper should be left in place until the final shape and position is determined
  • The surface should also be clean and dry to achieve permanent adhesion
  • If the building material surface is unstable then Cromar bituminous primer should be applied
  • Any jointing detail should have a minimum overlap of 100 mm
Write Your Own Review
You're reviewing:Cromar Lead Free Plus Lead Replacement Flashing
Your Rating