Cromar Cromapol CP Primer 5 litre
Cromar Cromapol CP Primer 5 litre
Available
- Buy 2 for £26.95 (£32.34 Inc VAT) each and save 4%
Have a Question?
Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.
Delivery Cost
Proceed to the Basket Page and use our Delivery Calculator for your order.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Description
Cromar Cromapol CP Primer 5 litre
Cromar Cromapol CP Primer is a vinyl acetate based primer specifically for priming mastic asphalt, concrete and asbestos surfaces prior to over-laying with Cromar Cromapol.
This products intended use is to prevent contamination of the Cromapol by the substrate that could lead to adhesion failure of the coating.
Colour:
- Off white transparent
Coverage:
- 3 to 6 square metres per litre, per coat, dependent upon the nature of the surface|
- Two coats of CP Primer should be applied
- 5 litres covers 7.5 m/2 to 15 m/2 in two coats
- 25 litres covers 37.5 m/2 to 75 m/2 in two coats
Technical
Coverage + -
- 3 to 6 square metres per litre, per coat, dependent upon the nature of the surface
- Two coats of CP Primer should be applied
- 5 litres covers 7.5 m/2 to 15 m/2 in two coats
- 25 litres covers 37.5 m/2 to 75 m/2 in two coats
Technical + -
- VOC Details: EU Limit for this product CAT. 2(h) : 750g/l
- This product contains max. 520g/l VOCs
- Drying time: 1 hour under normal conditions
Storage + -
- Containers must be kept sealed and stored away from sources of heat and ignition
Shelf Life + -
- 12 months in undamaged, tightly sealed containers
Features
- Primer for preparing surfaces prior to over-laying with Cromar Cromapol
- Prevents contamination of the Cromapol by the substrate that could lead to adhesion failure
Fixing
Preparation:
- Care needs to be taken over preparation of surfaces before application
- All surfaces must be clean, dry and free from oil, dirt, dust and loose debris
- Any moss or mould must be removed using Moss and Mould Remover
Method of Application:
- Two coats of CP Primer should be applied by brush, roller or squeegee to ensure an even coat with no pooling
- It may also be applied evenly by airless spray.
- CP primer will dry within 1 hour under normal conditions.
Cleaning Tools:
- Tools may be cleaned with Methylated Spirit.
Spillages:
- Minor spillages should be wiped off surfaces immediately before the product has set.
- Major spillages should be mopped up immediately with an inert, absorbent material, such as sand and disposed of in accordance with local regulations.
