UltraTile Polymer Slate Eaves Starter Strip

NOVIESTRIP/G
£10.95
( £13.14 Incl. VAT)
  • Buy 5 for £10.75
    ( £12.90 ) each and save 2%
  • Buy 10 for £10.45
    ( £12.54 ) each and save 5%
  • Buy 20 for £10.25
    ( £12.30 ) each and save 6%
Availability: In stock
- +

Velux Summer 2019 Promotion | About Roofing Supplies

Description

UltraTile Polymer Slate Eaves Starter Strip

The UltraTile Polymer Slate Roofing System not only replicates the natural look of slate tiles but is easier to install and less expensive than natural roof slates, and can typically be installed without incurring the extra structural cost needed to accomodate conventional slate roofing.

The UltraTile Polymer iSlate Roofing System is also designed to out-perform and be more cost-effective than any other synthetic slate tile replica system.

Designed to be laid on a 3B bituminous underlay (available separately) over boards such a 18mm OSB (available separately), this lightweight product can be used down to a very low 12 degree pitch, giving a look that is similar to natural roofing slates - but a fraction of the cost and weight.

Easy to cut with a hacksaw, and easy to lay: panels clip together and are then nailed onto the roof

Laid in conjunction with Novi Slate Polymer Roof Slate panels (available separately), Novi Slate Verge Trims (Available separately) and Novi Slate Ridge / Hips (available separately)

Click here to download details of the UltraTile Slate Polymer Roof Slate Manufacturer's Warranty

Click here to download installation and fixing details for the UltraTile Polymer Roof Slate range (Page 1 of 4)

Click here to download installation and fixing details for the UltraTile Polymer Roof Slate range (Page 2 of 4)

Click here to download installation and fixing details for the UltraTile Polymer Roof Slate range (Page 3 of 4)

Click here to download installation and fixing details for the UltraTile Slate Polymer Roof Slate range (Page 4 of 4)

Technical

Technical

  • Dimensions: 121 cm x 5.6 cm / 47.6" x 2.2"
  • Coverage: 1 strip covers 1.05 l/mtr when laid
  • Fire rating: Class C
  • Weight: 0.21 kg / strip
  • Minimum Roof Pitch: 12 degrees
  • Manufactured in Canada

Features

  • Up to 50 year guarantee (details upon request)
  • Can be used on roof pitches as low as 12 degrees
  • Lightweight
  • Resistant to temperature extremes, warping, cracking, roof expansion and retraction
  • Maintenance free
  • Authentic slate texture

Fixing

Video

Write Your Own Review
You're reviewing:UltraTile Polymer Slate Eaves Starter Strip
Your Rating