Redland Mini Stonewold Flat Profile Concrete Roof Tiles
In stock
Lead time confirmed upon order
- save
Have a Question?
Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.
Delivery Cost
Proceed to the Basket Page and use our Delivery Calculator for your order.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Redland Mini Stonewold Flat Profile Concrete Roof Tiles
Redland Mini Stonewolds are an economically priced, concrete flat profile roof tile with interlocking edges ensuring quick and simple construction, reducing the laid cost of the roof.
Able to be installed on roofs with a low pitch of 17.5 degrees and available in a wide range of colours, the Redland Mini Stonewold is an economical, ever popular choice for new build and renovation projects as well as for extensions.
Features
- Quickly & easily laid
- Suitable for roof pitches as low as 17.5 degrees
- Popular contemporary design
- Lightweight
Fixing
- Redland roof tiles must be laid and fixed to comply with BS 5534: the British Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British Standard Code of practice for workmanship on building sites.
- Redland Mini Stonewold roof tiles must be laid broken bonded, normally from right to left
- At right-hand verges use Standard Mini Stonewolds and Right-hand Half tiles or cut tiles in alternate courses
- At left-hand verges use Standard Mini Stonewolds with the interlocks removed, and Left-hand Half tiles or cut tiles in alternate courses
- At side abutments, allow for cover flashing and secret gutter
- The minimum pitches quoted are based on a maximum rafter length of 10 metres. For rafter lengths greater than this contact the Redland Technical Solutions Hotline on 08708 702595 for advice
- Please note: The minimum pitch may also be affected by the presence of roof features such as dormers, roof windows and chimneys.
Technical specification
Batten
- Battens Required: 3.15 m/m2 at 318 mm gauge / 2.92 m/m2 at 343 mm gauge
- Batten Size: 38 x 25 mm rafter centres up to 450 mm / 50 x 25 mm rafter centres up to 600 mm
- Nail Size: 50mm x 3.35mm
Composition
- Concrete
Conformity
- Redland Mini Stonewold Roof Tiles meet all the requirements of BS 5534: 2014 Code of practice for slating & tiling (providing Redland fixing recommendations are complied with) & BS EN 490: 2011 Concrete roofing tiles and fittings for roof covering & wall
Coverage
- Linear Cover of 1 Slate: 294 mm
- Covering Capacity (net): 10.7 slates/m2 at 318 mm gauge / 9.9 slates/m2 at 343 mm gauge
Gauge
- Minimum Gauge: 293 mm
- Maximum Gauge: 318 mm below 22.5 degrees
- Maximum Gauge: 343 mm at 22.5 degrees and over
Minimum & Maximum Roof Pitch & Headlap
- Minimum Pitch & Headlap: 17.5 degrees at 100 mm headlap / 22.5 degrees at 75 mm headlap
- Hanging Length: 397 mm approx
- Maximum Headlap: 125 mm
- Maximum Pitch: 90 degrees subject to fixing specification
Pallet Quantity
- Tiles per Pallet: 216
- Tiles per Pack: 36
Performance
- Redland Mini Stonewold Roof Tiles have been rigorously tested in a wind tunnel where combinations of high wind and driving rain are used to determine the tile performance with respect to wind loading and weathertightness.
Tile Size
- 418 mm x 334 mm
- Tile Thickness: 31 mm
- Hanging Length: 397 mm approx
Weight
- Laid Weight: 52 kg/m2 at 318 mm gauge approx / 49 kg/m2 at 343 mm gauge approx
- Weight per 1000 tiles: 5.10 tonnes approx
- Weight per Pallet: 1.12 tonnes approx