Play Grade Pine Playbark for Children's Play Areas - Bulk Bag
- Save 5% Buy 5 for £94.95 (£113.94 Inc VAT)
3 in stock
Lead time confirmed upon order
Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Play Grade Pine Playbark for Children's Play Areas - Bulk Bag is a play-grade loose-fill bark or woodchip surface for children's play areas.
Play bark and play chips are used to create a softer, free-draining surface beneath play equipment, swings and general play zones. Online play-surface suppliers commonly reference BS EN 1177 impact-attenuation testing and recommend installing to the correct depth for the equipment's fall height.
Best for
- Children's play areas
- Under swings, climbing frames and garden play equipment
- Nurseries, schools and domestic play spaces
- Areas needing a natural-looking impact-absorbing loose surface
Key features
- Loose-fill surface helps cushion falls when installed at the correct depth
- Natural-looking finish for garden play areas
- Free-draining material helps reduce standing water
- Can be topped up as the surface settles over time
Application / installation
- Install onto a prepared, contained area with suitable edging
- Lay to the recommended depth for the play equipment and required fall protection
- Rake level after installation and top up periodically as the material compacts or migrates
Things to consider before buying
- Check BS EN 1177 / critical fall height suitability for the equipment before use
- Loose surfaces require routine inspection, raking and top-ups
- Avoid contamination with soil, sharp objects, animal waste or general garden debris
Technical specification
Certification
- Conforms to BS EN 1176 by using the testing process BS EN 1177: 1998
- Critical fall height of 1.62m at 100mm depth and in excess of 3m at 300mm depth
- BS 71881998 Ease of Ignition Test
Details
- Produced from Premium British Pine Bark
- Nominal particle size range of between 1835mm & 3060mm
- 100% natural product and contains no additives or colouring
- Screened and processed to remove 98% of fines
- Contains minimal whitewood, normally within 5% (by vol