Manthorpe G502 650mm x 6 mtr Continuous Rafter Roll Eaves Panel Vent
( £13.14 Incl. VAT)
Buy 2 for
( £12.54 ) each and save 5%
Buy 4 for
( £11.94 ) each and save 9%
Manthorpe G502 650mm x 6 mtr Continuous Roll Eaves Panel Vent
Manthorpe G502 650mm x 6 mtr Continuous Roll Eaves Panel Vents are designed to maintain a flow of air to the roof space from outside, thereby allowing the escape of built-up moisture, and offer a simple and economical solution to the problems of eaves ventilation.
Made from a single strip of vacuum formed PVC, the panel can be rolled out over several rafters to create a ventilated gap beneath the felt running the span of the roof and provides a 25,000mm/2 airflow.
The castellated profile is suitable for 400mm, 450mm and 600mm raft centres, the panel has vertical strengthening ribs and is suitable for both refurbishment and new build applications and its flexibility makes it suitable for projects where rafter centres are not consistent or unknown.
The Manthorpe G502 650mm x 6 mtr Continuous Roll Eaves Panel Vent is designed to maintain an air gap between the underside of the roofing membrane or sarking board and loft insulation at the eaves, providing a continuous flow of air into the roof space.
- Colour: Black
- Material: PET (Polyethylene terephthalate)
- Width: 650mm
- Length: 6mtr
- Free Airflow 25,000mm/ equivalent to a continuous gap of 25mm
- 25,000mm/2 airflow
- Flexible to suit uneven refurbishment details
The Manthorpe G502 650mm x 6 mtr Continuous Roll Eaves Panel Vent should be rolled out over the full length of the eaves and adjusted to align with the required roof truss centres then nailed or stapled to secure in position.
Full fitting instructions are available to download from Manthorpe's website here