Knauf Earthwool Loft Roll 44 Glass Mineral Insulation 100mm / 150mm
In stock
Lead time confirmed upon order

Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Knauf Earthwool Loft Roll 44 Glass Mineral Insulation 100mm / 150mm is an insulation product used within the roof, loft, wall or floor build-up, helping improve thermal and/or acoustic performance.
In pitched roofs it may sit between rafters, below rafters, at ceiling/loft level or within adjacent wall/floor areas. Check the required U-value, ventilation strategy, vapour control layer and board/roll size before ordering.
Best for
- Improving thermal/acoustic performance in roofs, lofts, walls or floors
- New builds, extensions, refurbishments and energy-efficiency upgrades
Key features
- Sits within the roof, loft, rafter, joist, wall or floor build-up depending on the insulation type
- Brand: Knauf
- Longer roll lengths than competitors' alternatives
- Product is lightweight and partially perforated for quick installation
- Designed for use between either 400mm or 600mm joists
- Available in a range of thicknesses with a thermal conductivity of 0.044 W/mK
- Excellent thermal performance
- Non-combustible A1 Euroclass Reaction to Fire classification
- More insulation per roll than alternative loft rolls
- Soft to handle
Used with / Compatible with
- Rafters, joists, plasterboard, vapour control layers, breathable underlays and ventilation paths
- Use foil tape, VCL, cavity barriers or fixings where specified by the roof design
Things to consider before buying
- Check required thickness, U-value target and available rafter/joist depth
- Maintain required ventilation paths and use a vapour control layer where the roof design requires it
- Boards may need cutting and taping to minimise gaps and thermal bridging
Technical specification
Compliance
- CFC & HFC free
- Fire & Moisture resistant
- Zero ozone depletion potential
- Low GWP
- Non-combustible
- Euroclass A1 reaction to fire rating
Technical
- Length: 100mm Roll = 7280 mm / 150mm Roll = 4969mm
- Thickness: 100mm / 150mm
- Width: 1140mm
- Coverage: 100mm Roll = 11.087 m2 / 150mm Roll = 7.353 m2
- Material: Glass Mineral Wool
- Fire Retardant: Yes
- Thermal Conductivity: 0.044 W/mK
