Sandtoft Double Pantile Concrete Interlocking Roof Tiles

As low as

(£1.08 Incl. VAT)
Availability: In stock
- +

Pricing & Availability:

The pricing on this product is applicable to deliveries made to sites within the locality of our branches (which is broadly Surrey, Sussex, London and parts of Kent, Hampshire & Berkshire).

For pricing and availability on these products to sites that are outside of our local area please contact us directly so that we can explore the most cost effective options for you.

We also stock and supply a large range of roofing materials, with thousands more being available to order directly from all the leading manufacturers. If you don't see the roofing products that you need on this site please contact us and we will try to source them for you or offer you an alternative.

We are able to offer prices tailored to your exact requirements & project: Please call us on 01737 763008 or email us for a free quotation.


** Please note that these products can only be supplied in full pallets **



Sandtoft Double Pantile Concrete Interlocking Roof Tiles

The Sandtoft interlocking Double Pantile is one of the most popular and economical roof coverings available, that re-creates the flowing lines of a traditional pantile with an inherent strength in its curved design.

The Sandtoft Double Pantile can perform down to pitches as low as 15 degrees. Like all Sandtoft concrete tiles it is produced to a level of quality and consistency that is unmatched in the industry.



  • Quantity per pallet: 210
  • Band quantity: 35
  • Material: Concrete
  • Tile nails: 65 x 3.75 mm aluminium ring shank clout head


  • Weight as laid: 48.9 kg per m/2 (100mm headlap) / 45.6 kg per m/2 (75mm headlap)
  • Weight per 1000: 4.86 tonnes
  • Weight per tile: 4.72 kg


  • Minimum pitch (smooth finish): 15 degrees at 100mm headlap / 22.5 degrees at 75mm headlap
  • Minimum pitch (sandfaced finish): 30 degrees at 75mm headlap
  • Maximum pitch: 90 degrees
  • Headlap: 75mm (minimum) / 120mm (maximum)

Batten & Gauge

  • Maximum batten gauge: 345mm
  • Minimum batten gauge: 300mm
  • Battens per m/2: 3.1 linear metres at 100mm headlap / 2.9 linear metres at 75mm headlap
  • Batten size: up to 450 mm rafter centres 38 x 25mm
  • Batten size: up to 600 mm rafter centres 50 x 25mm


  • Covering capacity: 10.4 tiles per m/2 (100mm headlap) / 9.7 tiles per m/2 (75mm headlap)
  • Cover width: 300 mm
  • Profile depth: 55 mm
  • Hanging length: 402 mm

Tile Size

  • Size of tile: 420 x 334 mm


  • Economical
  • Traditional design
  • Suitable for low pitch applications down to 15 degrees (Smooth pitches) / 30 degrees (Sandfaced finishes)