RynoDeckSupport RDC Decking Cradles & Decking Cradle Shims
In stock
Lead time confirmed upon order

Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
RynoDeckSupport RDC Decking Cradles & Decking Cradle Shims is a decking cradle for flat roof paving / decking support accessory applications, helping create reliable waterproof protection on flat roofs.
This decking cradle sits above the flat roof waterproofing as part of a raised paving or decking support build-up. It helps create a level finished surface while protecting the membrane beneath when used with the correct protection layer.
Best for
- Raised paving or decking over flat roofs
- Balconies, terraces and walkways
- Projects needing level paving over roof waterproofing
Key features
- Brand: Ryno
- Material: Recycled Nylon (glass filled)
- Resistant to moulds, algae, alkali, bitumen
- Height Range: 10mm - 55mm
- Compression: 6 kN/m² (min. 6 cradles/m²)
- Base Diameter: 90mm
- Bearer width capacity: 44mm - 48mm
- MPN: RYNORDC
- RynoDeckSupport RDC cradles are the perfect solution where decking requires elevating off the ground by a minimal height.
- Simple to install and adjust, they are a very economical method of creating a clear space below the decking joists, which improves air circulation and can help to prevent rot.
- Size: 545mm
Application / installation
- Suitable for competent installers working to a level paving or decking layout
System components / used with
- Paving slabs, decking joists or support rails as appropriate
- Flat roof waterproofing and protection layer
- Shims, shockpads or spacer tabs where required
Ryno pedestal system information
- Designed for elevated paving areas over waterproofed flat roofs, terraces, balconies and podium decks.
- Helps create a level paved finish while leaving space below for drainage, services and maintenance access.
- The pedestal system can reduce the need for expensive and disruptive groundworks on suitable projects.
Things to consider before buying
- Check finished floor height, paving/deck thickness and load requirements before ordering
- Use a suitable protection layer above the waterproofing membrane
Features
- Supports very low decking applications, as low as 10mm support
- Perfect for patio overlays/renovations
- Ideal for creating balcony decking areas.
Technical specification
Technical
- Material: Recycled Nylon (glass filled)
- Resistant to moulds, algae, alkali, bitumen
- Height Range: 10mm - 55mm
- Compression: 6 kN/m2 (min. 6 cradles/m2)
- Base Diameter: 90mm
- Bearer width capacity: 44mm - 48mm
