Klober Plain Roof Tile Vent Adaptor & Flexipipe
VNTKPTVA
£17.95
(£21.54 Incl. VAT)
(£21.54 Incl. VAT)
- Buy 2 for £17.45
(£20.94 ) each and save 3% - Buy 10 for £16.95
(£20.34 ) each and save 6% - Buy 20 for £15.95
(£19.14 ) each and save 11%
Description
Klober Plain Roof Tile Vent Adaptor & Flexipipe
Soil / mechanical adaptor for use with the Klober Plain Tile Vent, together with a high quality flexible pipe with quick push fit for connecting to a standard 4" (100mm) flexipipe from an extractor fan, which is pushed inside the 110mm flexipipe spigot.
Enables you to connect a Klober Plain Tile Vent to a 4 inch (100mm) flexipipe from an extractor fan.
Please note that this adaptor will ONLY fit Klober PLAIN tile vents.
Technical
Technical
- Material: Adaptor & flexible pipe: PVC
Dimensions
- Dimensions: 273mm long x 44mm wide x 200mm deep
- Adaptor for Plain Tile Vent only: 110mm internal diameter
Features
- Quick and simple connection to internal pipework
- Unobtrusive method of venting soil/mechanical systems
- No tile cutting or lead flashing required
- Everything in one convenient pack
- Lightweight and durable
- Pressure tested to comply with relevant British Standards.
Fixing
Installation:
- Adaptor is clipped onto the underneath of the Plain Tile Vent ideally before installation.
- Flexpipe is secured to adaptor with a unique push fit connector.
- These adaptors will enable you to connect a Klober Plain Tile Vent to a standard 4" (100mm) flexipipe from an extractor fan, which is pushed inside the 110mm flexipipe spigot.
Related products
