Klober High Flow Roof Tile Vent - Redland Regent - 15,000mm² Free Vent Area - Brown
7 in stock
Lead time confirmed upon order
Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Klober High Flow Roof Tile Vent - Redland Regent - 15,000mm² Free Vent Area - Brown is a profile-specific roof tile vent designed to improve airflow through a pitched roof, helping reduce condensation and prevent moisture build-up in the roof void.
It sits externally at roof level in place of the matching roof tile and creates a controlled ventilation path into the loft space. The profile-matched cap helps maintain the roofline while allowing high or low level roof-space ventilation.
Best for
- Roofs with Redland Regent roof tiles
- High-level or low-level roof-space ventilation
- Improving airflow to help reduce condensation and moisture build-up in the loft void
- Mechanical extraction or soil pipe termination when used with the correct Klober adaptor/flexipipe
Key features
- 15,000mm² effective ventilation area
- Helps reduce condensation in the roof space
- Improves airflow at roof level
- Prevents moisture build-up caused by damp, poorly ventilated roofs
- Profile-specific vent cap designed to follow the base tile profile
- Prevents entry of birds and large insects where specified
Compatible with / used with
- Compatible with: Redland Regent roof tiles
- Tile type: concrete roof tiles
- External roof-level vent with internal loft-level airflow path
- Used with: Klober soil/mechanical adaptor and compatible flexipipe for extractor fans or soil ventilation
- Fan/pipe connection: adaptor and flexipipe should be checked and ordered separately unless sold as a kit
Ventilation performance
- 15,000mm² effective ventilation area per unit
- Can support 5,000mm²/m, 10,000mm²/m or 25,000mm²/m ventilation designs depending on spacing guidance where stated
- Helps improve roof-space airflow when installed at the correct locations and spacing
Things to consider before buying
- Confirm the exact tile profile before buying; this is not a universal vent
- Check the roof pitch and tile manufacturer guidance for the specific roof covering before installation
- Use the correct installation opening and follow manufacturer fixing guidance
- For bathroom/kitchen extraction, confirm the adaptor and flexipipe compatibility before ordering
- Ensure insulation does not block the airflow path at loft level
Features
- Provides a high level of ventilation
- Vent cap is designed to reflect the base tile profile
- Soil & Mechanical Adaptor (available separately) enables this vent tile to be used for soil ventilation or mechanical extraction
- Prevents entry of birds and large insects
Technical specification
<p>Performance
- Provides 15,000 mm2 effective ventilation area
- Vent spacing 5,000 mm2/m when installed at 3.0 m centres
- 10,000 mm2/m when installed at 1.5 m centres
- 25,000 mm2/m when installed at 0.6 m centres
Airflow Resistance
- 15 litres/sec - 3.5 Pascals
- 30 litres/sec - 14 Pascals
- 60 litres/sec - 56 Pascals