OSB3 Tongue & Groove 2400mm x 600mm x 18mm
OSB3 Tongue & Groove 2400mm x 600mm x 18mm
Description
OSB3 Tongue & Groove 2400mm x 600mm x 18mm
OSB3 Tongue & Groove 2400mm x 600mm x 18mm is a premium board for roofing or flooring applications, with edges machined to the finest tolerance for a perfect fit and faces calibrated to a standard finished thickness.
OSB3 18mm T&G is suitable for load bearing roofing and flooring applications in humid conditions (Service Class 1 & 2).
Recommended by the manufacturers of the Cure It roofing system as a base for the wet-laid GRP laminate (consisting of Reinforcement Mat saturated with Roofing Resin) which should be applied over a securely fitted OSB3 18mm T&G deck for the manufacturer's guarantee to apply.
Each sheet carries the FSC certification and CE Mark.
18mm OSB T&G is versatile, strong and cost-effective, and is manufactured with an exterior resin costing.
These boards are suitable for both interior and exterior structural applications such as:
- Roofing
- Flooring
- Wall sheathing
- Hoarding
Note: Boards supplied differ from image - tongue & groove on all four sides
Technical
Dimensions + -
- Overall length: 2410mm
- Overall width: 610mm
- Length when laid: 2400mm
- Width when laid: 600mm
- Thickness:18mm
- Coverage: 1.44m2
Technical + -
- Material: OSB3
- Certification : BBA certified
- Edging: Tongue & groove - 4 sides (differs from illustration)
- Finish: Sanded
Features
- Suitable for:
- Load bearing applications
- Roofing applications
- Use in humid conditions