Permaroof 9 Inch Flashing Tape for EPDM

Permaroof 9 Inch Flashing Tape for EPDM is a GRP roof trim for EPDM applications, helping create reliable waterproof protection on flat roofs.

This GRP roof trim forms part of an EPDM single-ply rubber roofing system. EPDM is used to create a durable, flexible waterproof layer over flat roof decks, with adhesives, primers, tapes and trims used to complete the system.

Best for

• EPDM rubber flat roof installations
• Extensions, garages, dormers and garden rooms
• Long-lasting single-ply waterproofing

Key features

• Brand: Firestone
• System type: EPDM (single-ply rubber)
• Designed for long-lasting waterproof protection when installed as part of the correct system
• Resistant to UV and weathering where installed to the manufacturer guidance
• The 9 Inch Flashing Tape is to flash upstands, skylights and internal/external corners. Its to be used with the Quickseam primer to complete the bond.
• Why Rubber EPDM?
• Permaroof EPDM is a synthetic rubber roof system, which is primarily used on flat roofs. The rubber is heat and weather resistant, making it a durable and reliable option with a 50 year life expectancy.
• Not only is EPDM durable, it has high flexibility and elongation. EPDM will elongate over 300% to compensate for building movement and flucuaitons with temperature.
• EPDM is heat and weather resistant with high flexibility and elongation

Application / installation

• Suitable for competent DIYers on simple roofs when the full EPDM system is used; professional installation is recommended for larger or detailed roofs
• Install in dry, suitable conditions unless the specific product states damp-weather application is allowed
• Surface must be clean, sound and prepared before application
• Use on a clean, dry compatible substrate such as OSB3/plywood with the correct EPDM adhesive, primer and tapes

System components / used with

• EPDM rubber membrane, bonding adhesive and water-based deck adhesive
• Quick Prime Plus, flashing tape, corner flashing and edge trims
• OSB3/plywood decks, concrete or compatible substrates where the adhesive system allows

EPDM system information

• EPDM is UV and ozone stable, helping it resist weathering and ageing over a long service life.
• Requires little or no maintenance once correctly installed as part of the full EPDM system.

Things to consider before buying

• Check substrate compatibility before ordering: OSB, plywood, concrete and existing felt overlays may need different preparation
• Install in dry conditions and avoid unsuitable cold temperatures unless the product data allows otherwise
• The surface must be clean, dry and free from loose material before application
• Use the correct adhesive type for the deck and upstand/detail areas