Timco Galvanised Single Piece Masonry Hanger - 100mm / 150mm / 200mm x 50mm
In stock
Lead time confirmed upon order
Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Timco Galvanised Single Piece Masonry Hanger - 100mm / 150mm / 200mm x 50mm is a galvanised single-piece masonry hanger for supporting timber joists built into brick or block walls.
The live product data states that it can be used for timber joists built into masonry and timber-to-timber applications, with a no-weld design for strength and corrosion resistance.
Best for
- Supporting timber joists in masonry walls
- Floor and roof joist support details
- Brick or block wall construction where a masonry hanger is specified
Key features
- Single-piece jiffy/masonry hanger
- Galvanised steel construction
- No welded joints
- Suitable for timber joists in brick or block walls
- Hangers 150mm and above may be manufactured 10mm shorter to allow for notching and regularised timber
Application / installation
- Install to the specified bearing and fixing requirements
- Use the correct nails, screws or fixings for the hanger
- Confirm load, timber size and masonry detail before installation
Things to consider before buying
- Check the hanger depth and width against the timber section
- Confirm whether the hanger size accounts for regularised timber/notching
- Structural connectors should be installed to the manufacturer or engineer specification