Easy Trim XPS Multi Cavity Closer - 100mm / 150mm x 2.4m
In stock
Lead time confirmed upon order
Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Easy Trim XPS Multi Cavity Closer - 100mm / 150mm x 2.4m is an Easy Trim XPS multi cavity closer for closing cavities around wall openings.
It helps close cavity gaps around windows, doors and openings in masonry, timber frame and steel frame wall constructions, reducing cold bridging and moisture migration risk.
Best for
- Window and door openings
- New build and refurbishment cavity walls
- Masonry, timber frame or steel frame wall systems where specified
Key features
- Available in two profile sizes to fit cavity widths between 50–150 mm
- Manufactured from extruded polystyrene foam (XPS) for easier cutting. Cut-to-size indicators are included for guidance
- Fully ridged polyvinyl chloride (PVC) cavity closure
- Helps to prevent cold bridging
- Reduces the risk of condensation, mould and moisture migration across the cavity
- Regulation and British Standard compliant.
Application / installation
- Cut to suit the required cavity width where applicable
- Fit around openings according to the wall system and cavity closer guidance
- Use suitable fixings and seal details as specified
Things to consider before buying
- Check colour, size and compatibility before ordering
- Keep ventilation/drainage paths clear of mortar and debris
- Follow the relevant cavity, underfloor or roof ventilation detail
- Confirm cavity width before ordering
- Cavity closers are not a substitute for proper structural fixing of frames
- Check Building Regulations and thermal detail requirements