Klober 15 x 9 Roof Tile Vent For Redland 49, Sandtoft Standard Pattern & Marley Ludlow Plus Roof Tiles
Klober 15 x 9 Roof Tile Vent For Redland 49, Sandtoft Standard Pattern & Marley Ludlow Plus Roof Tiles
In stock
Product Code
VNTK49VT
- save
From:
£25.50
(
£30.60
Inc VAT)
From
(
Inc VAT)
Description
Klober 15 x 9 Roof Tile Vent For Redland 49, Sandtoft Standard Pattern & Marley Ludlow Plus Roof Tiles
Low profile roof ventilation tile to fit Redland 49 roof tiles, Sandtoft Standard Pattern roof tiles, Marley Ludlow Plus roof tiles & Forticrete V2 roof tiles amongst others.
Simply replaces one tile on the roof. Manufactured from high impact p.v.c.u, making it very tough and able to withstand extreme temperatures.
Technical
Technical
- Material: UV resistant polypropylene
- Dimensions: 384mm x 229mm
Airflow
- Performance: Provides 10,000mm2 vent area
- Vent Spacing: 5mm Opening @ 2m Centres / 10mm Opening @ 1.0m Centres / 25mm Opening @ 0.4m Centres
- Minimum Roof Pitch: 20 degrees
Features
- Low profile design makes it virtually invisible on the roof
- Fully wind tunnel tested
- Adaptor available for soil ventilation or mechanical extraction. (Sold separately)
- Prevents entry of birds and large insects
- Complies fully with relevant Building Regulations and British Standards
- Minimum Roof Pitch: 20 degrees
- Oval spigot on rear of vent tile maximises air flow
Fixing
Installation:
- Lay the roof tiles in the normal manner and determine the location of the vent tile, which must be inline with the tile below
- Mark a 120 x 180mm wide rectangle on the underlay directly below the tile batten where the vent is to be fixed
- Carry out a star cut within the rectangle and fold the four tabs back and secure the top tab to the tiling batten
- Place and fix vent tile in position, ensuring the back of the spigot passes through the underlay, making sure the fixing lug on the underside of the vent tile is located under the left hand interlock of the roof tile. Then proceed with the tiling in the normal manner.