Sandtoft Dual Calderdale Edge Flat Profile Concrete Roof Tiles
Sandtoft Dual Calderdale Edge Flat Profile Concrete Roof Tiles
- save
From:
£1.45
(
£1.74
Inc VAT)
From
(
Inc VAT)
Description
Sandtoft Dual Calderdale Edge Flat Profile Concrete Roof Tiles
The new Sandtoft Calderdale Edge is the modern, re-engineered successor to traditional metric roof tiles such as the Sandtoft Calderdale.
Using less material than its predessor (5kg lighter over an m2), it is both bigger and stronger with a thinner interlocking design that improves performance with a modern large format aesthetic.
Please note that the Dual Calderdale Edge is not compatible with the original Dual Calderdale Traditional tile.
Technical
Technical + -
- Quantity per pallet: 192
- Band quantity: 32
- Material: Concrete
- Tile nails: 50 x 3.35 mm aluminium ring shank clout head
Weight + -
- Weight as laid: 50.5 kg per m/2 (100m headlap) / 46.5 kg per m/2 (75mm headlap)
- Weight per 1000: 5.098 tonnes
- Weight per tile: 4.95 kg
MINIMUM & MAXIMUM ROOF PITCH & HEADLAP + -
- Minimum pitch: 16.5 degrees at 100 mm headlap / 22.5 degrees at 75 mm headlap
- Maximum pitch: 90 degrees
- Headlap: 75 mm (minimum) / 120 mm (maximum)
Coverage + -
- Covering capacity at maximum gauge: 10.2 tiles per m/2 (100mm headlap) / 9.4 tiles per m/2 (75mm headlap)
- Cover width: 307 mm
- Profile depth: 28 mm
- Hanging length: 405 mm
Batten & Gauge + -
- Maximum batten gauge: 345 mm
- Minimum batten gauge: 300 mm
- Battens per m2: 3.1 linear metres at 100mm headlap / 2.9 linear metres at 75mm headlap
- Batten size: up to 450 mm rafter centres 38 x 25mm
- Batten size: up to 600 mm rafter centres 50 x 25mm
Tile Size + -
- Size of tile: 420 mm x 334 mm
Features
- Quick and easy to lay
- Can be used at a low minimum pitch of only 16.5 degrees when laid with a 100mm head lap
- Narrow 28mm profile improves appearance on low pitch roofs
- Single nail hole for quick fixing and a more defined nib, allowing for both easier hanging and stacking.
