- Product Description
Manthorpe G700 Circular Soffit Vent White
The Manthorpe G700 Circular Soffit Vent can be slotted into the soffit board prior to installation for new build situations or just as easily retro-fitted into existing soffits.
Standard fixing for this product is a simple push twist action into a 70mm hole drilled in the soffit board.
The vent features evenly spaced slots small enough to prohibit large insects gaining access but wide enough not to be blocked by debris, paint or water droplets.
The Manthorpe G700 Circular Soffit Ventilator is designed to be fitted before or after installation of soffit boards.
- To achieve 10,000mm/2 of free airflow the G700 should be fitted at 200mm centres
- To achieve 25,000mm/2 of free airflow the G700 should be fitted at 86mm staggered centres
- Manufacturing Process: Injection Moulded
- Colour: White
- Material: Polypropylene
FixingThe Manthorpe G700 Circular Soffit Ventilator should be a “push” fit into a 70mm (2.75”) diameter hole drilled into the soffit board.