Redland Double Roman Concrete Interlocking Roof Tiles
Redland Double Roman Concrete Interlocking Roof Tiles
Have a Question?
Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.
Delivery Cost
Proceed to the Basket Page and use our Delivery Calculator for your order.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Description
Redland Double Roman Concrete Interlocking Roof Tiles
Redland Double Roman Interlocking Roof Tiles are a classic interlocking concrete tile with a distinctive Roman profile, boasting a gentle roll and subtle pans.
It is available in a wide range of colours to blend harmoniously with any environment.
Once installed, these tiles create the look of a classic, clay double roman roof with the added advantage of being compatible with a wide range of fittings and accessories.
Technical
Pallet Quantity + -
- Tiles per Pallet: 252
- Supplied in bands of 42
Weight +
-
- Laid Weight: 46 kg/m2 at 318mm gauge / 43 kg/m2 at 343 mm gauge
- Weight per 1000 Tiles: 4.2 tonnes approx
- Weight per Pallet: 1.12 tonnes approx
- Weight per Tile: 4.2 kg
Minimum Roof Pitch & Headlap +
-
- Minimum Pitch & Headlap: Smooth: 17.5 degrees at 100mm headlap / 22.5 degrees at 75mm headlap
- Granular: 22.5 degrees at 100mm headlap / 30 degrees at 75mm headlap
- Max Pitch: 90 degrees subject to fixing spec
- Max Headlap: 125 mm
Coverage +
-
- Covering Capacity: 10.5 tiles/m2 at 318mm gauge / 9.7 tiles/m2 at 343 mm gauge
- Hanging Length: 397 mm approx
- Linear Cover of 1 Tile: 300 mm
Batten +
-
- Battens Required: 3.15 linear m/m2 at 315 mm gauge / 2.92 m/m2 at 343mm gauge
- Batten Size: 38 mm x 25 mm: rafter centres up to 450 mm / 50 mm x 25mm: rafter centres up to 600 mm
- Nail Size: 60mm x 3.35mm
Tile Size +
-
- Size: 418 mm x 330 mm
Gauge +
-
- Minimum Gauge: 293 mm
- Maximum Gauge: Smooth: 318mm below 25 degrees / 343mm at 25 degrees or above
- Granular: 318mm below 30 degrees / 343mm at 30 degrees or above
Performance +
-
- Redland Double Roman 50 Tiles have been rigorously tested in a wind tunnel where combinations of high wind and driving rain are used to determine the tile performance with respect to wind loading and weathertightness.
Conformity +
-
- Redland Double Roman 50 Tiles meet all the requirements of BS 5534: 2014 Code of practice for slating & tiling (providing Redland fixing recommendations are complied with) & BS EN 490: 2011 Concrete roofing tiles and fittings for roof covering & wall clad
Composition +
-
- Concrete
Features
- Economical
- Suitable for roof pitches as low as 17.5 degrees (Smooth finish only)
- Enduringly popular
- Clean, unobtrusive design
- Lightweight
Fixing
- Redland roof tiles must be laid and fixed to comply with BS 5534: the British Standard Code of practice for slating and tiling, and BS 8000: Part 6: the British Standard Code of practice for workmanship on building sites.
- Redland 50 Double Roman Tiles must be laid straight bonded, normally from right to left.
- At left-hand verges, use Standard Tiles with interlocks removed.
- At right-hand verges, use Standard Tiles.
- Half Tiles must not be used at verges
