Cromar Alphachem Exterior Water Seal 5 litre / 25 litre

Cromar Alphachem Exterior Water Seal 5 litre / 25 litre

Product Code SOLWATERSEAL

Options

Have a Question?

Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.

Delivery Cost

Proceed to the Basket Page and use our Delivery Calculator for your order.

Related Products

Cromar Cromapol Acrylic Waterproof Roof Coating Grey 1kg / 2.5kg / 5kg / 20kg - from About Roofing Supplies Limited

Available

£10.95 (£13.14 Inc VAT)
Cromar Cromapol Acrylic Waterproof Roof Coating White 5kg / 20kg - from About Roofing Supplies Limited

Available

£22.95 (£27.54 Inc VAT)
Cromar Cromapol Acrylic Waterproof Roof Coating Black 1kg / 5kg / 20kg - from About Roofing Supplies Limited

Available

£10.95 (£13.14 Inc VAT)

Description

Cromar Alphachem Exterior Water Seal 5 litre / 25 litre

Cromar Exterior Water Seal is a clear high performance waterproof treatment for exterior porous surfaces.

Technical

Technical: + -

  • VOC Details:EU Limit for this product (CAT.H) : 750g/l (2010). This product contains max. 730 g/l VOCs

Coverage: + -

  • Between 2 - m2/litre/coat (depending on suraface porosity)

Features

  • For use on brickwork, concrete, stone, paving, asbestos & cement
  • Can also be used to repel water on exterior wood that has previously been treated with a preservative

Fixing

Application:

  • All surfaces to be treated should be dry, clean and free from dirt, dust, oil, grease and organic growth
  • Surfaces may be washed down with clean water but detergents of soap solutions should not be used
  • Do not apply Exterior Water Seal for 2/3 days after rain
  • Defective mortar should be removed and replaced with new
  • The product will not be effective on materials that are unsuitable for exterior use
  • Should not come into contact with windows or other glazed areas, which should be masked to prevent splashes. In such instances contaminated areas should be wiped immediately with White Spirit
  • Exterior Water Seal is ready to use and should not be diluted
  • Shake container before use
  • The material should be applied liberally by soft bristled brush or lowpressure airless equipment avoiding mist forming by using a course spray nozzle
  • On masonry a single application is normally all that is required but on porous surfaces a second application may be applied as soon as the first coat has dried
  • On wood, two coats are also required
  • Treatment should start at the top and work down
  • Cannot be overpainted therefore it should be used as a final application only, as it may affect the adhesion of subsequent coatings
  • Storage Conditions: To ensure an airtight seal, replace lid immediately after use
  • Shelf life is indefinite if material is stored in a dry area at temperatures between 8 degrees C & 25 degrees C
  • If water or condensation enters the container, material should not be used as gelling may occur, please check prior to use
  • Cleaning Tools: All tools and brushes to be cleaned with White Spirit after use