Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit

Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit

Product Code TOORT70

Have a Question?

Our team have wealth of knowledge so why not pick their brains? Call us on 01306 770490.

Delivery Cost

Proceed to the Basket Page and use our Delivery Calculator for your order.

Related Products

Oxyturbo Replacement 4 Nozzle set for the Oxyturbo Turbo Set 90 kit - from About Roofing Supplies Limited

Available

£24.25 (£29.10 Inc VAT)
Oxyturbo Gas cylinder for Oxyturbo Turbo Set 90 lead welding kit - from About Roofing Supplies Limited

Available

£10.95 (£13.14 Inc VAT)
Oxyturbo Oxygen cylinder for Oxyturbo Turbo Set 90 lead welding kit - from About Roofing Supplies Limited

Available

£20.25 (£24.30 Inc VAT) (£22.74 Inc VAT)

Description

Oxyturbo Turbo Set 90 Lead Welding & Lead Burning Kit

The Oxyturbo Turbo 90 Kit is a compact, powerful kit primarily designed for lead welding and allows the end user to make professional welding.

This kit is also suitable for small hydraulics, air conditioning, plumbing and refrigeration system repairs.

WARNING: Very hot 3050c flame

PLEASE NOTE:

  • THESE KITS ARE NOT SUITABLE FOR WELDING OR CUTTING STEEL OR FOR MOST AUTOMOTIVE APPLICATIONS
  • THESE KITS ARE FOR USE BY PROFESSIONAL, TRAINED USERS ONLY AND WE STRONGLY ADVISE THAT THEY ARE NOT PURCHASED OR USED IF YOU ARE NOT AN EXPERIENCED, TRAINED PROFESSIONAL
  • THESE KITS ARE NOT SUITABLE FOR HOBBY OR DIY USE

Kit contents:

  • 1 x 930ml110 bar Oxygen cylinder
  • 1 x Maxy Gas 610ml / 350g cylinder
  • Professional quality compact metal trolley for bottles
  • Mignon oxygen pressure reducer & gas tap with flashback arrestors with two functions
  • Gas valve 7/16 with fine adjustment
  • Handgrip torch with adjusting knobs & built-in double protection oxygen and gas valves with adjusting taps
  • Adjusting knob for oxygen on the torch
  • Adjusting knob for gas on torch
  • Oxygen hose with connector
  • Gas hose with connector
  • Lance & 80lt nozzle
  • Flint Lighter
  • Multipurpose Wrench
  • Star holder with 4 nozzles (63 lt /100 lt /160 lt/225 lt)
  • Brass welding rods
  • Safety Goggles

Note: 

  • The oxygen and gas cylinders include with this set are non-refillable
  • Do not connect cylinders or cartridges before you have read the instructions
  • Please read the Instruction Manual thoroughly before using the Kit.
  • When connecting the Oxygen Regulator to the Oxygen bottle DO NOT overtighten as this will stem the Oxygen flow.
  • Store Oxygen & Gas bottles in an upright position using the trolley (included) as bottles not kept upright may result in an inconsistent Gas / Oxygen flow and subsequent poor performance.
  • Each time that the Kit has been used, make sure that the regulators on top of each bottle are turned off whilst the flame is still ignited to use up any remaining Gas and Oxygen in the hoses and neck assembly. Then turn off both adjusting knobs on the handle. This is to ensure that you do not have any "flaring" when initially using the Kit next time due to residual Gas / Oxygen from the previous time that the Kit was used.

Read our handy guide for instructions on how to set up, use, maintain and store an Oxyturbo Turbo Set 90 lead welding kit

Technical

Features

  • Compact: Minimal kit weight of only 5kgs
  • Integral practical handle and two locking devices for bottles make it possible to carry the set everywhere
  • Safety is guaranteed by four flashback arrestors with double protection: one on the pressure reducer, one on the gas tap and two integrated in the handgrip 

Blog Posts (2)