PLEASE NOTE THAT WE ARE CLOSED OVER THE ENTIRE EASTER WEEKEND: GOOD FRIDAY 10.04.20 - SATURDAY 11.04.20 - EASTER SUNDAY 12.04.20 - BANK HOLIDAY MONDAY 13.04.20

We will be open as normal from Tuesday 14.04.20 onwards

04.04.20: WE ARE OPEN TO FULFILL ORDERS THAT HAVE ALREADY BEEN PLACED AND ONLINE ORDERS ONLY IN ACCORDANCE WITH THE LATEST UK GOVERNMENT GUIDELINES. 

BECAUSE OF THE HIGH VOLUME OF ORDERS BEING RECEIVED, AND DISRUPTION TO DELIVERY SERVICES, ORDERS ARE TAKING LONGER TO PROCESS AND DESPATCH SO THERE ARE DELAYS.

PLEASE CHECK WITH US BEFORE PLACING ORDERS OR VISITING OUR BRANCHES FOR THE LATEST UPDATE

PLEASE CLICK HERE FOR FURTHER DETAILS ON OUR CORONAVIRUS FAQs PAGE

 

Easy Trim HouseBreathe Breathable Membrane For Walls 100mtr x 1.35mtr

BMAHB1.35/100
£79.95
(£95.94 Incl. VAT)
  • Buy 2 for £78.95
    (£94.74 ) each and save 1%
  • Buy 5 for £77.95
    (£93.54 ) each and save 3%
  • Buy 10 for £76.95
    (£92.34 ) each and save 4%
Availability: In stock
- +

Velux Rewards Q2 2020 Promotion | About Roofing Supplies

Description

Easy Trim HouseBreathe Breathable Membrane For Walls 100mtr x 1.35mtr

Easy Trim HouseBreathe is a spun bonded polypropylene flexible sheet, developed primarily for use in timber frame wall construction, HouseBreathe provides protection against wind-driven rain, snow and dust whilst still allowing the controlled release of vapour from within the timber frame.

HouseBreathe conforms to the requirements of W2 material in accordance with BS EN 13859-2:2010 and needs to be installed, used and maintained in accordance with it’s CE certificate and installation instructions.

Supplied in roll form, HouseBreathe should be fixed to frames with stainless steel nails or staples at centres no more than 500mm.

On areas where sheets are required to be lapped, the following dimensions must be adhered to: Vertical 150mm Horizontal 100mm.

Upper layers should overlap lower layers to shed water away from the sheathing.

Vertical laps should be staggered wherever possible. Positions of studs should be marked on the face of the breather membrane, by tape, to enable the securing of wall tie fixings.

Technical

Technical:

  • Thickness: 0.4mm
  • Weight:100 g/m/2
  • Colour: Grey
  • Storage: Rolls should be stored flat on their sides, on a smooth, clean, dry surface, under cover and protected from sunlight

Features

  • Highly permeable to water vapour
  • Enhances the airtightness of the building construction
  • Long-term reliability