Cromar Cromapol CP Primer 5 litre / 20 litre
£21.95
(£26.34 Incl. VAT)
Description
Cromar Cromapol CP Primer 5 litre / 20 litre
Cromar Cromapol CP Primer is a vinyl acetate based primer specifically for priming mastic asphalt, concrete and asbestos surfaces prior to over-laying with Cromar Cromapol.
This products intended use is to prevent contamination of the Cromapol by the substrate that could lead to adhesion failure of the coating.
Colour:
- Off white transparent
Coverage:
- 3 to 6 square metres per litre, per coat, dependent upon the nature of the surface|
- Two coats of CP Primer should be applied
- 5 litres covers 7.5 m/2 to 15 m/2 in two coats
- 20 litres covers 30 m/2 to 60 m/2 in two coats
Technical
Coverage
- 3 to 6 square metres per litre, per coat, dependent upon the nature of the surface
- Two coats of CP Primer should be applied
- 5 litres covers 7.5 m/2 to 15 m/2 in two coats
- 20 litres covers 30 m/2 to 60 m/2 in two coats
Technical
- VOC Details: EU Limit for this product CAT. 2(h) : 750g/l
- This product contains max. 520g/l VOCs
- Drying time: 1 hour under normal conditions
Storage
- Containers must be kept sealed and stored away from sources of heat and ignition
Shelf Life
- 12 months in undamaged, tightly sealed containers
Features
- Primer for preparing surfaces prior to over-laying with Cromar Cromapol
- Prevents contamination of the Cromapol by the substrate that could lead to adhesion failure
Fixing
Preparation:
- Care needs to be taken over preparation of surfaces before application
- All surfaces must be clean, dry and free from oil, dirt, dust and loose debris
- Any moss or mould must be removed using Moss and Mould Remover
Method of Application:
- Two coats of CP Primer should be applied by brush, roller or squeegee to ensure an even coat with no pooling
- It may also be applied evenly by airless spray.
- CP primer will dry within 1 hour under normal conditions.
Cleaning Tools:
- Tools may be cleaned with Methylated Spirit.
Spillages:
- Minor spillages should be wiped off surfaces immediately before the product has set.
- Major spillages should be mopped up immediately with an inert, absorbent material, such as sand and disposed of in accordance with local regulations.